Stereo high fidelity speakers with soft mount pouches.
High fidelity chin-bar surface mount internal Microphone
Main Module with a 5-pin jack and a 1/8" input/output jack
for additional ear-buds or audio input device
12" Kevlar core reinforced upper cable
connecting cable for most Bluetooth GPS units that have
standard 2.5mm microphone input jack, and a 3.5mm stereo
Installation supplies and instructions
Cable Works With
Garmin Zumo 550, 660, 665
Garmin Nuvi 650,660,670,680
760, 765T, 770, 775T, 780, 785T
Garmin Nuvi 880, 885T
Garmin StreetPilot c550,c580, 2820
Some 5-Pin Hand Held CB Systems
Click here for
installation instructions & options.
no-nonsense manufacturer warranty.
This headset includes a lower
connecting cable for most Bluetooth GPS units that have standard
2.5mm microphone input jack, and a 3.5mm stereo audio jack
For FULL FACE helmets,
choose the AUD-3GGPS-FULL with Surface Mic.
For OPEN FACE / FLIP-UP /
CLAM-SHELL helmets, choose the AUD-3GGPS-OPEN with
the TAB mount internal boom mic.
The headset ships complete
with EVERYTHING you need to enjoy all the features of your
GPS, including Bluetooth pairing of your cell phone for
phone calls into and out of your helmet, XM radio, Voice
Navigation Prompts, FM Traffic, and MP3 Music playback and
more. All touch screen features are compatible with the
headset so you can dial, and receive calls, adjust volumes,
and control MP3 and other audio features while connected to
the headset in your helmet.
Gold Plated Connectors
Industry standard Molex connectors for speaker and microphone
plugs/jacks, standard DIN/Mini-DIN 5 and 6-Pin connectors for
bike, and upper lower cords
FULL Face: Select the AUD-3GGPS-FULL option with surface
Open Face, 3/4 Face, Clam Shell or Flip-Up Helmets: Select
the AUD-3GGPS-OPEN with tab mounted internal boom mic
Weather Plugs: The 3G headsets have three jacks for an
external mic, an audio in/out jack, and the upper cable jack.
Rubber weather plugs are provided to keep rain and dust out of
vial of 3M Primer 94 is included to ensure that our patented
mounting system has maximum strength.
Foam Backing: This foam backing pad is not required, but is
included to improve the looks of the 3G module by filling in any
small variations in the shape of helmets vs the shape of the 3G
High Fidelity Speakers: 1.6" diameter x 3/8" thick
(including pouch and mounting fasteners) , 8-Ohm, 50 - 20Khz,
86dB/w SPL, 0.2W power max, continuous operation at 0.175mW
Microphone: Tab mounted internal boom mic or 1" square
chinbar surface mounted microphone. 550-Ohm dynamic moving-coil
element, 50-20Khz response
Construction: All cables are made with stranded Kevlar to
ensure that the helical wound electrical conductors never take
any mechanical loads, ensuring long life.
Upper cable: Gold plated straight 5mm cable plugs into 3G
module, is removable and can be left in place indefinitely.
Lower Cable:for most bluetooth GPS units
that have standard 2.5mm microphone input jack, and a 3.5mm
stereo audio jack
patented speaker pouch is made from helmet liner padded material
for comfort and acoustic transparency, and with sturdy backs for
mounting with Velcro. Speakers may be mounted in the pouches or
without pouches in helmets that have pockets or skirts.