Click here for
installation instructions & options.
no-nonsense manufacturer warranty.
This headset is designed to work with open face, half shell (Shorty),
and Flip-up (Clam-shell) helmets for factory audio systems or EdSet
cables to plug directly into your GPS or MP3 player
The TAB mount
boom mic mounts internally in the helmet using Dual Lock (like Velcro,
but much stronger) strips.
replace the lower cable and use this headset with many other systems,
6-Pin handlebar CB, Bluetooth GPS like the Zumo, and even iPod and
similar devices. Call for more info on your application.
Gold Plated Connectors
Industry standard Molex connectors for speaker and microphone
plugs/jacks, standard DIN/Mini-DIN 5 and 6-Pin connectors for
bike, and upper lower cords
This headset is designed for typical Open Face (3/4" Shell),
Flip-Up (Clam-Shell / Modular) Helmets, and can be used on
N-Com helmets and others by mounting normally over or close to
any manufacturer's mounting features.
Weather Plugs: The 3G headsets have three jacks for an
external mic, an audio in/out jack, and the upper cable jack.
Rubber weather plugs are provided to keep rain and dust out of
vial of 3M Primer 94 is included to ensure that our patented
mounting system has maximum strength.
Foam Backing: This foam backing pad is not required, but is
included to improve the looks of the 3G module by filling in any
small variations in the shape of helmets vs the shape of the 3G
High Fidelity Speakers: 1.6" diameter x 3/8" thick
(including pouch and mounting fasteners) , 8-Ohm, 50 - 20Khz,
86dB/w SPL, 0.2W power max, continuous operation at 0.175mW
Construction: All cables are made with stranded Kevlar to
ensure that the helical wound electrical conductors never take
any mechanical loads, ensuring long life.
Upper cable: Gold plated straight 5mm cable plugs into 3G
module, is removable and can be left in place indefinitely.
Lower Cable: Lower cable with 5-Pin DIN compatible with
all Asian 5-Pin factory systems. Upper connector to mate with
EdSets Upper Cable only.
The patented speaker pouch is made from helmet liner padded
material for comfort and acoustic transparency, and with sturdy
backs for mounting with Velcro. Speakers may be mounted in the
pouches or without pouches in helmets that have pockets or